To select finishing settings, To select finishing settings -26 – Konica Minolta bizhub 750 User Manual
Page 63
Advertising
2
Using copy functions
2-26
bizhub 750/600
Using copy f
unct
ions
Chapter 2
To select Finishing settings
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
2
Select the desired settings.
– To cancel changes to the settings, touch
[Cancel].
– To cancel a setting, touch the button again to
deselect it.
– If the “Corner Staple”, “2 Staple”, “2-hole Punch”
or “3-hole Punch” setting was selected, touch
[Position Setting], and then touch the button for
the desired position.
Advertising
This manual is related to the following products: