Konica Minolta bizhub 750 - Manual (Page 67)

2 Using copy functions
2-30 bizhub 750/600
Using copy f
unct
ions
Chapter 2
2.10 Selecting the Paper settings
Specifying the paper size
The size of the paper loaded into the bypass tray can
be specified.
For details on selecting the Paper settings, refer to the
User’s Guide [Copy Operations].
The size of the paper loaded into the bypass tray can
be selected in any of the following ways.
Setting Description
Auto Detect Select this setting to automatically detect the
size of the paper loaded into the 1st tray.
Standard Size
*1
The paper size can be set for the bypass tray
so that it can be used with the specified
paper size.
This is useful when the size of the paper that
is loaded cannot be automatically detected.
Custom Size
*2
A custom paper size can be set so that the
paper tray is used specifically with the
selected paper size.
Oversized
Paper
*3
A wide paper size can be set so that the
paper tray is used specifically with the
selected paper size.