Konica Minolta bizhub 20 - Manual (Page 27)

27
For Network Users
BRAdmin Light utility (For Mac OS
®
X users)
BRAdmin Light is a utility for initial setup of KONICA MINOLTA network connected devices. It also can search for
KONICA MINOLTA products on your network, view the status and configure basic network settings, such as IP
address from a computer running Mac OS
®
X 10.3.9 or greater.
The BRAdmin Light software will be installed automatically when you install the printer driver. If you have already
installed the printer driver, you do not have to install BRAdmin Light again.
Set your IP address, Subnet Mask
and Gateway using BRAdmin Light
a
Double-click Macintosh HD on your desktop.
b
Choose Library, Printers, KONICA MINOLTA
and then Utilities.
c
Double-click the file BRAdmin Light.jar and
run the software. BRAdmin Light will then
search for new devices automatically.
d
Double-click the unconfigured device.
e
Choose STATIC for Boot Method. Enter the
IP Address, Subnet Mask and Gateway, and
then click OK.
f
The address information will be saved to the
machine.
Note
• If you have a DHCP/BOOTP/RARP server in
your network, you do not have to do the
following operation. The machine will
automatically obtain its own IP address.
• Make sure that version 1.4.2 or greater of Java
client software is installed on your computer.
• The default password for the machine is
‘access’. You can use BRAdmin Light to
change this password.