Konica Minolta bizhub 20 - Manual (Page 24)

24
Macintosh
® Wired Network
For Wired Network Interface Users
(Mac OS
®
X 10.3.9 or greater)
15
Before you install
a
Make sure your machine is connected to the
power and your Macintosh
®
is ON. You must
be logged on with Administrator rights.
16
Connect the network
cable
a
Connect the network interface cable to the LAN
connector marked with a symbol and then
connect it to a free port on your hub.
17
Install Multi-Function
Suite
a
Put the supplied CD/DVD-ROM into your
CD/DVD-ROM drive.
b
Double-click Start Here OSX to install.
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.
c
The KONICA MINOLTA software will search
for the KONICA MINOLTA device. During this
time the following screen will appear.
IMPORTANT
Make sure a USB Flash memory device is not
inserted into the machine.
Note
Please see the Network User’s Guide on the
CD/DVD-ROM if you want to install the PS driver.
(BR-Script Driver)