Konica Minolta bizhub PRESS 1052 - Manual (Page 14)

bizhub PRESS 1250/1250P/1052 2-4
2.2 Installation Procedures 2
7
Hold the lever [M8] and open the reversing paper exit unit
to the direction of arrow.
8
Rotate the lock screw (purple) to the direction of arrow to
release the lock.
9
Holding the handles on the front [1] and rear [2] of the fus-
ing unit with both hands, slide the unit to the direction of
arrow, and then pull it up to remove it.
Be careful in handling the fusing unit because it may be
very hot.
10
Holding the handles on the front [1] and rear [2] of EF-102
with both hands, set the unit to the correct position, and
then slide it to the direction of arrow until it knocks in place.
11
Push in the lock screw (purple) and rotate the screw to the
direction of arrow to lock the unit.