Konica Minolta bizhub C25 - Manual (Page 205)

Scanning With the Machine 7-26
Editing/Deleting Group Dial Destinations
Information registered with a group dial destination can be edited or deleted.
1
In the main screen (Scan mode), press the + or , key to select [UTILITY],
and then press the Select key.
2
Press the + or , key to select [DIAL REGISTER], and then press the
Select key.
3
Press the + or , key to select [GROUP DIAL], and then press the Select
key.
4
Use the keypad to type in the number (between 1 and 20) for the group
dial destination to be edited/deleted, and then press the Select key.
The information currently registered for the group dial destination
appears for about two seconds.
5
Press the + or , key to select [EDIT] to edit information or [DELETE] to
delete the destination, and then press the Select key.
If [DELETE] was selected, the settings are deleted, and the [DIAL REGIS-
TER] menu appears again.
6
If desired, edit the group name, and then press the Select key.
d
For details on entering/editing text, refer to “Entering Text” on
page 12-8.
7
Press the + or , key to select [ADD] to add a speed dial destination,
[CHECK/EDIT] to delete the destination or [FINISH] to finish editing, and
then press the Select key.
If [FINISH] was selected, the edited settings are saved, and the [DIAL
REGISTER] menu appears again. If [ADD] was selected, continue with
step 6 of “Registering Group Dial Destinations” on page 7-25. If [CHECK/
EDIT] was selected, continue with step 8.
8
Press the + or , key to select the speed dial destination to be deleted,
and then press the Stop/Reset key.
d
To check the settings for the selected speed dial destination,
press the Select key.
9
Press the + or , key to select [YES], and then press the Select key.
10
After the speed dial destination is deleted, press the Back key.
11
To delete another speed dial destination, repeat the procedure from step
8.