Konica Minolta bizhub PRESS C1060 - Manual (Page 2)

2
Cannot create a booklet from a one-page document
A one-page document cannot be printed as a booklet. If you try to create a booklet from a
one-page document, an error message appears.
Use embedded profile option with APPE enabled
Changing the RGB rendering intent may affect the output of CMYK data when using CPSI
with the “Use embedded profile when present” option. As a workaround, use APPE rather
than CPSI, or change the RGB Rendering intent to “Relative.”
AppleTalk support
AppleTalk is supported for only font downloads if you enable the option in Configure >
Network > Protocol. You cannot print jobs with the AppleTalk protocol.
When multiple jobs are imported to the Held Queue in a group, the
job order is not cared
Use a mouse to select multiple jobs and import into the correct order in the Held Queue.
Output image of body pages from a booklet rotates 90 degrees after
printing a Microsoft Word document
In Command WorkStation, in the Driver properties of a Word document, if the job has either
Left or Top binding for Short Edge Feed (SEF) prints, or 1-up Perfect binding specified, the
output image of body pages from a booklet is rotated 90 degrees after printing. The image
rotation error does not occur with standard size or custom LEF documents. Use standard sizes
if the rotation error occurs with the custom sizes and top binding specified.
Sequential Print
When Secure Print is selected, Sequential Print is not honored.
Printing A4 images on A3 paper
When you print an A4 image on A3 paper, if you select Scale to FIT the top line of the image
is thick and the bottom line is thin.
Booklet jobs with blank pages
When you print a Booklet job with Mixed Media and specify a New Page Range with mixed
color mode, blank pages may be added before the first page specified and after the last page
specified.
Custom user colors
Custom user colors created on the printer do not appear in Job Properties.