Konica Minolta bizhub C10X - Manual (Page 121)

NETWORK SETTING Menu 111
Gateway
"
When “ IP ADDRESS ” is set to “ AUTO ”, this menu option is not avail-
able.
Purpose Sets the address of the router/gateway if a router/gateway
is used on your network and you allow users outside your
network environment to print on your printer.
Range (If “IP ADDRESS” is set to “SPECIFY”)
0–255 for each xxx triplet
Use the keypad to input each number; use the Left and
Right keys to move between triplets.
Default (If “IP ADDRESS” is set to “SPECIFY”)
0.0.0.0
Notes A single digit number, such as “1”, cannot be input as “001”.
Align the number on the left and input “1” as “1 _ _”. Use
the * and ) keys to move between triplets.
The Cancel/C key can also be used for deleting. To cancel
Gateway menu, hold down the Cancel/C key for more than
one second, and then press the Cancel/C key again after
all settings have been cleared.
After changing the settings, the printer must be turned off,
then on again.