Konica Minolta bizhub 200 User Manual
Page 196
Advertising
Appendix
7
200/250/350
7-3
A
p
p
end
ix
Ch
apte
r 7
EF09D3
The specified data cannot be
accessed.
Check that the data has not been deleted.
EF09D4
The specified data cannot be
read from the box.
Routing cannot be performed since the spec-
ified data does not contain pages to be sent.
Save the data on the hard disk again, and then
try routing again.
EF09D5
The data saved with the older version of the
firmware cannot be routed.
Error code
Cause
Remedy
Advertising
This manual is related to the following products: