Konica Minolta bizhub 200 - Manual (Page 70)

Printing documents 3
200/250/350 3-17
P
rint
ing
doc
um
ent
s
Chap
ter
3
2
Note
The staple settings are available only if optional finisher is installed.
The Punch setting is available only if optional finisher and punch unit are
installed.
The “Crease” setting is available only if optional finisher and saddle
stitcher are installed.
Length of time that proof print data is saved
When the specified length of time has elapsed after printing a proof copy
from the computer, proof print data saved on the machine is automatically
deleted.
The length of time that data is saved on the machine can be set using the
“Document Hold Time” parameter (displayed by touching [Printer Setting],
then [MFP Set] on the Utility/Counter screen). For details, refer to the User’s
Guide [Print Operations].
Printing a proof copy from the computer
1
On the [File] menu of the software, click [Print].
– Before printing a proof copy, clear the “Collate” check box under
“Output”.
The print settings dialog box appears.
2
From the “Output Method” list, select “Proof and Print”.
3
Specify any other desired print settings.