Konica Minolta bizhub 200 - Manual (Page 134)

Control Panel Settings 5
200/250/350 5-27
Cont
ro
l P
ane
l S
e
tt
ing
s
Cha
p
ter 5
Specifying settings for the image in the failed transmission report (mode
023)
Specify whether or not an image of the transmitted document is added to the
failed transmission report.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit 7 6 5 4 3 2 1 0
Setting 1 1 1 1 1 0 0 0 (HEX: F8)
Bit Description Setting Description Page
Reference
7, 6, 5, 4 ----------------------- 1111 *Do not change these bits
when specifying settings
for this function. ----------
3 Specifies whether or
not an image of the
transmitted docu-
ment is added to the
failed transmission
report. 0 Is not added ----------
1 Is added
2, 1, 0 ----------------------- 000 *Do not change these bits
when specifying settings
for this function. ----------