3 scanning and saving the data (scan to hdd), Available functions/parameters, Scanning and saving the data (scan to hdd) -7 – Konica Minolta bizhub 200 User Manual

Page 30: Available functions/parameters -7

Advertising
background image

Saving documents

2

200/250/350

2-7

Sav

ing d

o

c

u

me

nts

Ch

apte

r 2

2.3

Scanning and saving the data (Scan to HDD)

Scan data can be saved in an HDD box on the machine’s internal hard disk.
The following procedures describe operations that must be performed and
the settings that must be specified when touching a single button to save a
document.

Available functions/parameters

Touch [Quality & Reduction] or [Menu] in the screen that appears after the
[Fax/Scan] key in the control panel is pressed, and then specify settings for
the following functions/parameters when saving the scanned document.

2

Note

The following Quality & Reduction parameters have no effect, even if set-
tings have been specified.

- “Reduction” on the Reduction/Area tab

Quality/Reduction screen

2

Note

The following Menu functions and parameters have no effect, even if set-
tings have been specified.

- “TSI” on the Setting 1 tab
- “Rotation TX” on the Setting 1 tab
- “Subject Selection” on the Network tab
- “Reply Address” on the Network tab

Menu screen

Parameter

Description

Page
Reference

Quality

Select the scanning resolution (amount of details).

p. 2-11

Density

Specify the density for scanning.

p. 2-12

Reduction/
Area

Original
Size Set.

Select the desired standard size for the area to be
scanned.

p. 2-14

Advertising
This manual is related to the following products: