3 printing a proof copy, Printing a proof copy -16 – Konica Minolta bizhub 200 User Manual

Page 69

Advertising
background image

3

Printing documents

3-16

200/250/350

P

rint

ing

doc

um

ent

s

Chap

ter

3

3.3

Printing a proof copy

Before printing a large number of copies, a single proof copy can be printed
to be checked before the remaining copies are printed.
When printing the remaining copies from the control panel, settings for the
following can be changed.

2

Note

“Proof and Print ”can be selected while the “Sort ”check box is selected.
When printing a proof copy, settings cannot be specified on the Per Page
Setting tab.

!

Detail

When the machine is turned off, data saved for proof printing is deleted.
If the machine is turned off before the data is printed, the document must
be specified again for printing from the computer.

Available Functions

Description

# of Sets

Specifies the number of copies to be printed. Use the key-
pad to type in a number between 1 and 999.

Single-Sided/Double-Sided

Select whether a single-sided or double-sided copy is to be
printed.

Staple settings

Either “Corner Staple” or “2 Staples” can be selected.
To specify the stapling position, touch [Position Setting].
Whether the pages are stapled at the top or on the left side
can be specified.

Hole-Punch

Holes can be punched in the pages. To specify the hole-
punching position, touch [Position Setting].

Crease

The pages can be folded in half.
If the print command is sent from the computer, the setting
for this function can be specified is “Booklet” is selected.

Change the settings of

the selected document.

Proof

Print

Enter

Position Setting

Cancel

Print

Proof

Print

Auto

Job List

Advertising
This manual is related to the following products: