ADC GSM Base Transceiver Station UltraWAVE BTS - Manual (Page 2)

6/08
•
106416AE
UltraW
A
VE
BTS
UltraWAVE BTS
GSM Base Transceiver Station
2 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
Features:
Available in 850, 900, 1800 and 1900 MHz frequency bands •
Frequency hopping •
Sectorization •
General Packet Radio Service (GPRS) •
GSM EFR voice codec •
Dynamic power control (uplink and downlink) •
Significantly improved BTS sensitivity: -114 dBm (optimal combining diversity) or -111 dBm (no diversity) •
Remote monitoring: Temperature, fan, power supply (PSU), power amp, VSWR can be monitored from •
central office enabling remote diagnosis and quick recovery
External alarms for third party equipment are also supported •
Optional redundant power supply with PSU failure alarm support •
Adaptive AC PSU (110V or 220V) •
-48 VDC is also supported •
Integrated full rack solution available: UltraWAVE integrated with additional on-site equipment such •
as transmission, battery backup, etc. in one rack
Common hardware modules: single slot TRX, ICP, RFU •
The UltraWAVE BTS supports up to twelve TRXs in one chassis. With a single compact chassis, it can
support a S444 site. It has the industry leading power amplifier at 50 Watts when configured for
850 MHz, 900 MHz, 1800 MHz and 1900 MHz GSM networks. UltraWAVE supports all the key BTS
features, such as frequency hopping, sectorization, and GPRS. It provides sufficient capacity for urban
high capacity coverage (up to S666) and is flexible enough to scale from S111 to S666 supporting
the popular BTS configurations, S222 and S333. It increases the BTS coverage with industry leading
power output (50W measured at antenna port without combining). Receive sensitivity with antenna
diversity is up to -114 dBm. Designed for easy expansion of the BTS capacity, the UltraWAVE BTS is field
upgradable. Operators can start with a small system and pay as they go to add capacity.
The UltraWAVE BTS is designed for low cost maintenance with remote monitoring, external alarms,
overheating protection, redundant power supply, field replaceable modules, and easy front access. It can
reduce the on-going operation expenses for the operators. An integrated turn-key BTS package option
is available with transmission, battery, and other site equipment.