Konica Minolta bizhub PRESS C1100 - Manual (Page 14)

2-4 bizhub PRESS C1100/C1085
Security Functions 2 2.2
2.2 Security Functions
2.2.1 Security Mode
The bizhub PRESS C1100/C1085 have two security modes.
Normal mode
Use this mode when the machine is used by a single person and there is low possibility of illicit access or
operation. This mode is already set as factory default. To use the machine in normal mode, refer to the user's
guides provided for each operation.
Enhanced Security mode
Use the Enhanced Security mode when the machine is connected to a local area network, or to external net-
works through a telephone line or other means. An administrator determined for the machine management
should follow the instructions in this guide, so that users can have a safe operating environment.
To use the Enhanced Security mode, contact your service representative for the following settings.
A service representative should set a CE password for CE authentication and administrator password on the
machine. The service representative uses the CE password for CE works. The administrator, who obtains the
administrator password from the service representative, uses that password to make settings related to the
Enhanced Security mode.
The administrator should never leak the administrator password out to others.
The administrator who acquired the administrator password manages the machine set up with the Enhanced
Security mode by making settings in the following order:
1. Turning on/off the Enhanced Security mode
2. HDD lock password
3. Adding/Changing/Deleting registered users
The administrator is also responsible in providing users with the following instructions:
- Never leak his/her password out to others.
- Be sure to log out when completing the machine operation after logging in upon the user authentication.
Be sure to use the Enhanced Security mode to prevent unauthorized access to HDD.
With the Enhanced Security mode activated, the machine displays a security icon in the lower-
right area of the touch panel.
The security icon disappears when the Enhanced Security mode is deactivated. If the administrator acciden-
tally deactivates the Enhanced Security mode, contact your service representative. You should ask a cus-
tomer engineer (CE) to check the security environment and settings before activating the Enhanced Security
mode again.