Konica Minolta IC-413 - Manual (Page 42)

bizhub PRESS C7000/C6000 5-8
5.3 Registering a User Box 5
5
Configure the necessary items on the Add Address screen. Pressing an each item displays the char-
acter input screen.
% For more information on how to input characters, refer to page 3-6.
% If you want to use this copier as a scanner, it is recommended that an administrator assigns a user
box to each user and informs the assignment by an E-Mail in advance.
% The user box can protect each user's data.
6
Press [OK].
[Box Name]: Input the box name within 64 characters in alphameric characters and
signs.
•
Symbol input is disabled by default. If you want to enable the symbol
input, contact your service representative.
Make sure to input the box name (the user name) that has been registered
in the controller.
•
The job will be cancelled if you try to save scanned data to a box that
has not been registered.
For details, refer to page 5-6.
[Register
Name]: Input the Name that is displayed on the Select Addresses screen (HDD)
within 24 characters in alphameric characters and signs.
•
If you input [Register Name] without inputting [Box Name], [Register
Name] is inputted as [Box Name] automatically. Input [Box Name]
again if [Register Name] is different with Box Name that has been reg-
istered in the controller.
[Reference
Name] Used as a search keyword when you search addresses. Enter a reference
name within 24 characters in alphameric characters and signs.