Konica Minolta IC-413 User Manual
Page 66
bizhub PRESS C7000/C6000
6-11
6.3
Storing in the Hard Disk
6
4
Press [Scan Settings].
5
Configure the necessary items.
6
Set an original and press [Start].
The original is scanned, and the scanned data are stored in the [guest] box.
% Press [Address] to return to the Select Addresses screen.
% Refer to the user's guide that came with your IC-306/IC-413 or more information about method to
load scanned data stored in the hard disk into a computer.
% The settings specified in the Scan Settings screen and address selected in the Select Addresses
screen may be left until it is restarted. It is recommended to release the setting and address once
the operation is completed.
You can release the setting by pressing [Reset] on the Control Panel when the Scan Settings screen
is displayed. You can also release the address by pressing [Address] to return to the Select Ad-
dresses screen and then pressing [Clear All] or [Reset] on the Control Panel.