Konica Minolta BIZHUB C360 - Manual (Page 148)

bizhub C360/C280/C220 8-10
8.2 Using device certificates depending on protocol 8
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
d
Reference
When not using device certificates depending on protocols, specify the device certificate shown in [Default]
of [Device Certificate Setting]. For details, refer to page 8-2.
8.2.1 [Device Certificate Setting]
Register a device certificate.
For details, refer to page 8-2.
8.2.2 [Protocol Setting]
In the administrator mode of PageScope Web Connection, select [Security] ö [PKI Settings] ö [Protocol
Setting].
Reference
- The function that uses device certificates depending on protocols is not available when a device certif-
icate is not registered or is only in the certificate signing request state.
[Device Certificate Setting]
[Protocol Setting]
Finish
Item Description Prior check
[Protocol 1]/[Proto-
col 2] Displays the classification for each protocol.
If the target device certificate is registered, the protocol is
marked by "*".
[Create] Select the protocol to specify a device certificate, and
click [Create]. The device certificate registration page ap-
pears, and you can specify the target device certificate.
If the device certificate is already registered, [Edit] ap-
pears. Clicking [Edit] enables you to change the target de-
vice certificate or confirm the details of a device
certificate.
[Delete] If the target device certificate is registered, click this but-
ton to delete the registered information.