1 [tcp/ip settings, 2 [device certificate setting, 3 [web service common settings – Konica Minolta BIZHUB C360 User Manual
Page 158: Tcp/ip settings] -20, Device certificate setting] -20, Web service common settings] -20
bizhub C360/C280/C220
8-20
8.6
Using Web services to secure communication from Vista/Server 2008 to this machine via SSL
8
8.6
Using Web services to secure communication from Vista/Server
2008 to this machine via SSL
Configure settings to use the encrypted SSL communication from a computer running on the Windows Vis-
ta/Server 2008 to this machine in a Web services environment. Security of Web services communication can
be enhanced using the SSL protocol encryption.
When you configure the SSL communication settings, check the following points.
-
To use the encrypted SSL communication between this machine and the computer, you must set the
bidirectional SSL communication between them. For details on configuring settings to establish an SSL
communication from this machine to Windows Vista/Server 2008, refer to page 8-21.
-
Your computer must be able to resolve the name of this machine using the DNS. Register this machine
in the DNS server and configure the DNS settings in your computer in advance.
-
If the certificate of this machine is not the one issued by the Certificate Authority (CA), you must register
the device certificate in [Trusted Root Certification Authorities] of the local computer.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
8.6.1
[TCP/IP Settings]
Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-2.
8.6.2
[Device Certificate Setting]
Configure settings for SSL communication.
For details, refer to page 8-2.
8.6.3
[Web Service Common Settings]
In the administrator mode of PageScope Web Connection, select [Network] ö [Web Service Settings] ö
[Web Service Common Settings].
Finish
Item
Description
Prior check
[Friendly Name]
Enter a Friendly Name (up to 62 characters).
[SSL Setting]
Select [ON].
[Publication Serv-
ice]
If you use this machine in an environment where NetBIOS
is disabled or only the IPv6 protocol communication is
used by the Windows Vista or Server 2008 system, set this
item to [Enable].