Konica Minolta BIZHUB C360 - Manual (Page 210)

bizhub C360/C280/C220 10-18
10.6 Reporting the status of this machine (TRAP) 10
10.6 Reporting the status of this machine (TRAP)
Configure settings to report the status of this machine to the administrator using the SNMP TRAP functions.
If an alarm has occurred on this machine, it can be reported to the specified IP address or IPX address by
the SNMP TRAP.
To use the SNMP TRAP functions, you must set the SNMP in advance. For details, refer to page 10-12.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
10.6.1 [TCP/IP Settings]
Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-2.
(1) Notification to IP address
(2) Notification to IPX ad-
dress
(1) (2)
[TCP/IP Settings] [NetWare Setting]
[TRAP Setting]
[Status Notification Setting]
Finish