7 sending scanned data to the ftp server, 1 [tcp/ip settings, 2 [ftp tx setting – Konica Minolta BIZHUB C360 User Manual
Page 62: Sending scanned data to the ftp server -26, Tcp/ip settings] -26, Ftp tx setting] -26
bizhub C360/C280/C220
4-26
4.7
Sending scanned data to the FTP server
4
4.7
Sending scanned data to the FTP server
Configure settings to send scanned data to the FTP server.
You can send scanned data to the specified folder in the FTP server via the network, which contains the FTP
server. This allows you to download the data sent to the FTP server from a computer via the network. This
function is suitable to send a large amount of data such as high-resolution data.
If a proxy server is in network environment, you can configure settings to access the FTP server on Internet
via the proxy server.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
d
Reference
For details on how to register the FTP address, refer to page 11-7.
For details on FTP file sending, refer to the [User's Guide Network Scan/Fax/Network Fax Operations].
4.7.1
[TCP/IP Settings]
Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-2.
4.7.2
[FTP TX Setting]
In the administrator mode of PageScope Web Connection, select [Network] ö [FTP Setting] ö [FTP TX Set-
ting].
Finish