Konica Minolta PageScope Log Management Utility - Manual (Page 26)

Log Confirmation 4
Log Management Utility 4-5
4
In Registered name , input the registered device name.
– A maximum of 64 byte characters can be input.
5
In Device address , input the IP address or the host name of the de-
vice.
– 1-255 single byte upper case alphanumeric characters or symbols
can be input.
6
In Administrator password , input the device administrator password.
– Select Save the administrator password to save the administra-
tor password for the device.
– If the device to register is specified as a Specify as Reception Tar-
get in Detail , then specify Save the administrator password .
– Click Detail to display the device detailed settings dialog box. For
details, please refer to “Registration of Device” on page 5-11.
7
Click OK .
This starts a connection test to the device, and then a confirmation
screen is displayed.