Konica Minolta PageScope Log Management Utility - Manual (Page 29)

Log Confirmation 4
Log Management Utility 4-8
3
On the Toolbar, click the “Receive” icon.
– Alternatively, select RX from the Log menu.
If no administrator password has been saved, then an administrator
password input dialog box will be displayed. Proceed to step 4.
If an Administrator password has been saved, then neither administra-
tor password input, nor an SSL connection confirmation dialog box will
be displayed.
4
In Administrator password , input the device administrator password,
then click OK .
– Select Save the administrator password to save the administra-
tor password for the device.
An SSL connection confirmation dialog box will be displayed.
5
Confirm the details in the dialog box, then click OK .
– If SSL communication has been specified, then a Confirm SSL
Certificate dialog box will be displayed.
– If SSL communication has not been specified, then a dialog box
asking whether to continue will be displayed.