Konica Minolta BIZHUB 223 - Manual (Page 24)

bizhub 423/363/283/223 3-3
3.1 General copy operation 3
5
Press the Start key.
The original is scanned and copied.
% To temporarily stop the copy operation, press the Stop key.
% If [Ready to accept another job.] appears while printing a job,
you can scan the next original.
Reference
- Some settings cannot be combined with each other. If they are combined improperly, the settings will
be given priorities in either of the two ways described below.
– The setting configured last is given priority. (The setting configured first is canceled.)
– The setting configured first is given priority. (A warning message appears.)
- In User Settings, you can select to display [Next Copy Job]. For details, refer to [User's Guide Copy
Operations].
- If an original with copy guard patterns embedded is scanned, the copy operation is stopped and the
job is discarded.
- If an original with a password embedded by the password copy function is scanned, the copy operation
starts after you enter the password.
- If multiple originals with different passwords are scanned at the same time, you will need to enter a
password for each original.