Konica Minolta BIZHUB 223 - Manual (Page 26)

bizhub 423/363/283/223 3-5
3.2 [Basic] 3
[Background Removal] [Bleed Removal] Select this setting to remove background prints of
the original. Normally, select [Bleed Removal].
[Paper Discolora-
tion Adj] If the original to be scanned has a colored back-
ground, adjust the background with this button to re-
move it before copying.
[Background Re-
moval Level] [Light] Each time this button is pressed, the
background density is lightened by one
level.
[Stand-
ard] Press this button to select the third level
from the right (default).
[Dark] Each time this button is pressed, the
background density is darkened by one
level.
[Auto] The background density is detected au-
tomatically and adjusted to the optimal
level.
You can specify [Auto] for [Background
Removal Level] only when [Standard] is
selected for the density. Even if [Auto] is
specified for [Background Removal Lev-
el], [Auto] is canceled for [Background
Removal Level] if the density is selected
to other than [Standard].
[Main Screen] Press this button to return to the basic settings screen with the changed
settings applied.
Settings