Konica Minolta BIZHUB 223 - Manual (Page 15)

bizhub 423/363/283/223 2-7
2.1 Control Panel and functions 2
[Default Enlarge Display Settings]
The default settings for Copy mode or Fax/Scan mode can be configured.
0 Display the enlarged display screen of the mode to be configured, and configure the settings in ad-
vance.
%
Display the enlarged display screen of the mode to be configured, and then press the Utility/Counter
ö [User Settings] ö [Copier Settings] or [Scan/Fax Settings] ö [Default Enlarge Display Settings] to
apply the settings.
<In case of [Copier Settings]>
d
Reference
You can also configure the default enlarge display settings in the Accessibility screen. For details, refer to
page 2-8.
2.1.4 Mode Memory
Display the Fax/Scan screen, and then press the Mode Memory key to recall a fax/scan program in which
destination and scan settings are collectively registered. This is convenient for frequently sending data under
the same conditions.
0 You must register programmed settings using the standard screen in advance.
0 For details on registering programs, refer to [User's Guide Network Scan/Fax/Network Fax Operations].
%
Display the Fax/Scan screen, and then press the Mode Memory key.
Settings
[Default Enlarge Display
Settings] [Current Setting] The settings configured before pressing the Util-
ity/Counter key are registered as the default set-
tings for Copy or Fax/Scan mode.
[Factory Default] The factory default settings are registered as the
default settings for Copy or Fax/Scan mode.