Konica Minolta Magicolor 2550 - Manual (Page 136)

Solving Problems with Media Misfeeds 122
Media is
misfeeding. Transparencies have
collected static elec-
tricity in the tray. Remove the transparencies and load
them in Tray 1 one sheet at a time. Do
not fan transparencies before loading
them.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used. Use KONICA MINOLTA-approved
media.
See “Media Specifications” on page
52.
The media feed roller
is dirty. Clean the media feed roller.
For more details, refer to “Interior” on
page 99.
Symptom Cause Solution