Konica Minolta Magicolor 2550 - Manual (Page 158)

Hard Disk 144
Hard Disk
If a hard disk is installed, fonts can be downloaded and saved, and the over-
lay function can be used.
Installing a Hard Disk
Note
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on Page 140. In addition,
always handle circuit boards by the edges only.
1
Turn off the printer and discon-
nect the power cord and inter-
face cables.
!"
If the duplex option is
installed, remove it.
2
Using a screwdriver, remove the
screw on the back of the printer.