Konica Minolta bizhub C200 - Manual (Page 19)

Fax Driver 2-8
Installing the fax driver 2
2.3 Installing the fax driver using the Add Printer Wizard
As an example, the following describes the installation procedure via a network connection (LPR/Port9100).
When using the LPR/Port9100 printing, specify the port during the printer driver installation process.
!
Detail
For installation procedures via other network connections (SMB, IPP/IPPS), refer to the User’s Guide
[Print Operations].
2.3.1 Settings of this machine
Before using this machine in a network environment, the network settings must be specified for this machine.
IP address setting for this machine
Specify the IP address on the TCP/IP Setting screen of this machine.
!
Detail
For details on specifying the IP address of this machine, refer to the User’s Guide [Network
Administrator].
Specifying the RAW port number for this machine
To use Port9100 printing, enable the RAW port setting on the TCP/IP Setting screen of this machine, and
specify the RAW port number (default setting is "9100").
!
Detail
For details on specifying the RAW port number of this machine, refer to the User’s Guide [Network
Administrator].
LPD setting for this machine
To use LPR printing, enable the LPD settings on the TCP/IP Setting screen of this machine.
!
Detail
For details on LPD settings of this machine, refer to the User’s Guide [Network Administrator].
2.3.2 For Windows XP/Server 2003
2
Reminder
When installing on Windows XP/Server2003, administrator permissions are required.
1
Insert the printer driver CD-ROM into the computer’s CD-ROM drive.
2
Click the [Start] button, and then click "Printers and Faxes".
– If "Printers and Faxes" does not appear in the Start menu, open the Control Panel from the Start
menu, select "Printers and Other Hardware", and then select "Printers and Faxes".