Konica Minolta bizhub C200 - Manual (Page 36)

Fax Driver 3-6
Setting up the fax driver (Windows) 3
5
Specify the recipient information on the Recipient tab.
– Standard: Specifies standard text.
– Details: Specifies the details described under "Recipient Setting Details".
– Load with Joint Name: Lists the recipient with joint names. The items listed are the items shown
under "Recipient List" on the FAX Transmission Popup dialog box.
– Load Set Information: Lists the information that was entered in the "Company", "Department",
"Name", and "FAX Number" text boxes.
– Read: Reads the information of the first recipient to the information box.
– If "Load with Joint Name" is selected, the names that were added are entered, but titles cannot be
added.
– If a recipient is not specified on the FAX Transmission Popup dialog box, "Load Set Information"
cannot be selected. In addition, it cannot be selected on the FAX tab in the FAX Printing Preferences
dialog box as well.
6
Specify the sender information on the Sender tab.
Select the check box of the information to be listed, and then enter the information.