Konica Minolta PagePro 1300 Series - Manual (Page 18)

Print Server Configuration
2-8 BaseLine Print Server User Manual
'EPSON Status Monitor support' enables or disables the support of
the EPSON Status Monitor. If the parameter has been enabled,
printer status messages, such as display of ink level, are displayed.
If an EPSON printer is used with a print server, the parameter
should be enabled. You should disable the parameter if a printer of
a different manufacturer or an EPSON printer together with a RIP
is used.
'Job receive timeout (seconds)' specifies the time out value (in
seconds) for receiving print jobs. If the spooler does not send any
print job within the timeout period, the connection between the
print server and the spooler will be interrupted. If the value is set
to '0', this function is disabled. If you want to use the timeout
option, we recommend using the value '120'.
2.3.2 Configuring the Printer Port
'Fast mode' activates or deactivates the fast mode of box or pocket
print servers. Using the fast mode, the print server speed can be
increased. With older printer models, we recommend disabling the
fast mode.
'Port mode' specifies the communication between the print server
and the printer. You can select unidirectional or bidirectional
communication or the Konica Minolta GDI printing support.
2.3.3 Configuring TCP/IP
The 'TCP/IP' page is used for configuring the TCP/IP parameters.