Konica Minolta PagePro 1300 Series - Manual (Page 38)

10BaseT Ethernet Networks
A-2 BaseLine Print Server User Manual
A.2 10BaseT Ethernet Networks
For the cabling of the 10BaseT network of the print server, all
specifications of the ISO/IEC8802-3 standard apply. The most
important data is listed in the following table:
In 100BaseTX networks, a shielded, twisted-pair cable of the
category 5 must be used for print server cabling. This guarantees
proper EMC behavior (electromagnetic compatibility).
A.3 100BaseTX Ethernet Networks
For the cabling of the 100BaseTX network of the print server, all
specifications of the ISO/IEC 8802-3u standard apply. The most
important data is listed in the following table:
Data Values
Max. cable length 100 m
Cable type S/UTP Typ "category 5"
Impedance 100 Ohm
Connector type RJ-45
Data Values
Max. cable length 100 m
Cable type S/UTP Typ "category 5"
Impedance 100 Ohm
Connector type RJ-45