Konica Minolta bizhub C650 - Manual (Page 47)

Issued by BT-CSO Ver 1.03 47
Flow chart for Repair
¾ There are 3 steps to perform Repair.
1. Gather information from MFP
2. Access to LMS
3. MFP Repair
The following is the flow chart for the Repair.
Light blue
Yellow
Pink
Complete Repair Operation
If license management error displayed after the replacement
of NVRAM, the activated functions before the replacement will
be displayed. To use the function, please reactivate the
function by performing activation operation.
Input the [Repair Code] in MFP
through the control panel.
Receive [Repair Code] from LMS.
Confirm that access to LMS using
Web browser is possible.
Prepare PC
Get
[Serial Number]
[Request Code]
[Repair Request Code
(Repair Demand Code)]
Enter the following information on LMS.
[Serial Number]
[Request Code]
[Repair Request Code (Repair Demand Code)]
Access to LMS using Web browser.
Prepare MFP