Konica Minolta bizhub C650 - Manual (Page 58)

Issued by BT-CSO Ver 1.03 58
Flow chart for Initialization
¾ There are 3 steps to perform Initialization
1.
Gather necessary information
2.
Prepare Initialization
3.
Perform Initialization
The following is the flow chart for the initialization.
Light Blue
Yellow
Pink
Inform the following to Service Contact
[Serial Number]
[Request Code]
[Service History]
Receive
[Initialization Code]
Input the initialization code through
the control panel.
Complete Initialization
Perform license activation when
necessary.
Prepare MFP
From MFP
[Serial Number]
[Request Code]
Prepare when communicating
with service contact
[Service history]
- Parts
Replacement
- Result of repair operation