Konica Minolta bizhub 25 - Manual (Page 68)

1
2
Operating the Machine
Scanning 2-15
Specify the FTP shortcut.
3
If you loaded the document in the ADF, this concludes the procedure. •
If you loaded the document on the document glass, load the next document, and press [Next •
Doc]. To finish scanning, press [Complete].
Scanning to USB Memory
You can scan a document to a USB memory device that is directly connected to the
machine.
USB memory
Note
Only USB memory formatted with FAT12, FAT16, or FAT32 can be used. •
Support cannot be guaranteed with USB memory with embedded security functions, •
memory card readers connected via USB, USB memory connected via an extension
cable and USB hub, and/or USB memory that does not meet USB standards.
If the USB memory becomes full during the scanning process the entire scan job •
will be deleted. Therefore, make sure that the USB memory has enough free space
in advance.
If you want to connect the USB memory via an extension cable, use a cable that is •
shorter than three meters.