Konica Minolta bizhub 25 - Manual (Page 69)

2-16 Scanning
Load the document, and press <Scan>.
1
For details on loading documents, refer to “ Loading Documents ”. (See page 1-31.)
Press the [PC/USB] tab, and then [USB].
2
Connect the USB memory to the machine.
3
Press <Start>.
4
If you loaded the document in the ADF, this concludes the procedure. •
If you loaded the document on the document glass, load the next document, and press [Next •
Doc]. To finish scanning, press [Complete].
When the message “Scan Ready” is displayed on the screen, remove the USB memory.
•