Connection and main settings, Connecting the power cord, Connecting the lan cable – Konica Minolta bizhub 25 User Manual
Page 31: Connection and main settings -12
1-12 Connection and Main Settings
Connection and Main Settings
Connecting the Power Cord
Warning
Connect the power cord to the power jack, and confirm that it is firmly inserted.
•
Loose connections may cause fires.
Make sure to connect the ground wire to prevent electrocution in case of electrical
•
leakage.
Confirm that there is no dust attached to the power plug before inserting it into
•
the outlet. Remove, inspect, and if necessary, clean the power plug once every six
months to a year. Dust attached to the power plug may cause fires or electrocutions.
Connect the power cord to the power jack on the left side of the machine.
1
Secure the power cord using the included clamp.
•
Use the screw that is attached to the cover.
•
Insert the power plug into the power outlet.
2
Connecting the LAN Cable
Attach a ferrite core to the LAN cable.
1
Make a loop near the connector of the cable.