Konica Minolta bizhub C451 - Manual (Page 297)

Specifying Utility mode parameters 7
C451 7-5
3
Type in the password, and then touch [OK].
– For details on typing in text, refer to “Entering text” on page 8-3.
– To finish specifying settings in the Utility mode, press the [Utility/
Counter] key. Otherwise, exit the Utility mode by touching [Close] in
each screen until the screen for the Copy, Fax/Scan or User Box
mode appears.
The Administrator Settings screen appears.
!
Detail
If “Prohibited Functions When Authentication Error” is set to “Mode 2” an
incorrect administrator password is entered the specified number of
times, it is no longer possible to enter Administrator mode. For details on
the “Prohibited Functions When Authentication Error” parameter, refer to
the User’s Guide [Copy Operations].