Konica Minolta bizhub C451 - Manual (Page 52)

Saving documents 2
C451 2-17
8
After typing in the name, touch [OK].
– To change the name, touch [Delete] until the characters are deleted,
and then type in the new name.
– To erase all of the text, press the [C] (clear) key.
9
Select whether or not a copy will also be printed when the data is
saved. To print a copy, touch [Yes].
10
Touch [OK].
11
Specify the necessary copy settings.
– If a User Box function was set, [Save in User Box] appears selected.
12
Load the document into the ADF or place it on the original glass.
13
If desired, press the [Proof Copy] key to check a preview image.
– For details on using previews in Copy mode, refer to the User’s
Guide [Copy Operations].
14
Press the [Start] key in the control panel.
– If “Yes” was selected beside “Save & Print”, the scanned document
is copied and the document data is saved in the specified user box.
– If “No” was selected beside “Save & Print”, the scanned document
data is saved in the specified user box.
!
Detail
For details on the copy settings, refer to the User’s Guide [Copy Opera-
tions].
For details on printing the document saved in a user box, refer to “Print-
ing a user box document” on page 4-2.