Konica Minolta bizhub C451 - Manual (Page 204)

Sending a user box document 5
C451 5-2
5 Sending a user box document
5.1 Overview of document transmissions
Available document transmission operations
Document data saved in a user box can be sent using four different methods.
The data can easily be routed simply by registering a destination with this
machine instead of by sending the data through different computers.
2
Note
Documents saved from Copy mode cannot be sent.
Transmission methods
Specify the destination using any of the following four methods depending
on the desired transmission purpose and use. Destinations can be specified
using any combination of these methods.
Method Description
E-mail Document data can be sent as an e-mail attachment.
PC (SMB) Document data is sent to a shared folder on the specified computer.
FTP Document data is uploaded to the specified FTP server.
WebDAV Document data is sent to the specified server on the network.
Method Description Page reference
Address book desti-
nation Select different destinations from those registered
in the address book. p. 5-8
Group destinations Multiple destinations can be registered together
with this method. This is convenient when docu-
ments are always sent to the same destinations. p. 5-9
Direct input With this method, destinations for e-mail transmis-
sions, FTP transmissions, SMB transmissions and
WebDAV transmissions are entered directly from
the control panel. This is used when sending data to
a destination that is not already registered. p. 5-13
Address search Select this method when an LDAP server is used.
Addresses registered on the LDAP server can be
searched for the address that corresponds to the
specified conditions. p. 5-21