19 search default setting, To specify the detect default server settings, Search default setting -87 – Konica Minolta BIZHUB C252 User Manual

Page 198: To specify the detect default server settings -87

Advertising
background image

Specifying Settings From the Control Panel

3

C252

3-87

Sp

ec

ifyin

g

Set

tin

gs

F

ro

m

th

e

Co

nt

ro

l Pa

ne

l

Chapter 3

3.19

Search Default Setting

You can specify the LDAP server that is to perform searches by priority from
the registered LDAP servers.

To specify the detect default server settings

1

In the Administrator Setting screen, touch [5 Network Setting].

2

In the Network Setting screen, touch [7 LDAP Setting].

3

In the LDAP Setting screen, touch [3 Search Default Setting].

The Detect Default Setting screen appears.

4

Select the LDAP server that is to perform searches by priority.

5

Touch [OK].

2

Note

To cancel changes to the setting, touch [Cancel].

To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.

Advertising