Konica Minolta BIZHUB C252 User Manual
Page 74
Advertising
Scanning Documents
2
C252
2-41
Scan
nin
g
Do
cu
men
ts
Chapter 2
5
Touch [Scan Settings], and then specify the scan settings.
–
For details on the scan settings, refer to “Specifying the Scan Set-
tings” on page 2-42.
6
After specifying the settings, touch [OK].
7
Load the document into the ADF (optional) or position it on the original
glass of the machine.
8
Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
2
Note
Do not turn off the machine until the scanned jobs disappear from the job
list.
!
Detail
When a work group and computer that exceed the numbers described
below exist, browsing over the network (subnet) of this machine may not
be performed properly.
- Work group: 128
- Computer: 128
Advertising