Konica Minolta BIZHUB C252 - Manual (Page 148)

Specifying Settings From the Control Panel 3
C252 3-37
Sp
ec
ifyin
g
Set
tin
gs
F
ro
m
th
e
Co
nt
ro
l Pa
ne
l
Chapter 3
TWAIN Lock Time
The machine’s operation lock time of the control panel during scanning (ex-
cluding PUSH scan) can be specified (initial value: 120 seconds).
1
In the User Setting screen, touch [5 Scanner Setting].
– To display the User Setting screen, refer to page 3-7.
2
Touch [TWAIN Lock Time].
3
Press the [C] (clear) key to erase the value, and then use the keypad to
type in a time period (between 30 and 300 seconds).
– If a value outside of the allowable range is specified, the message
“Input Error” appears. Type in a value within the allowable range.
4
Touch [OK].
The TWAIN lock time is set.