Setting the from address, Specifying the scan settings – Konica Minolta BIZHUB C252 User Manual

Page 28

Advertising
background image

Before Using the Scan Functions

1

C252

1-9

Be

fo

re

Using

t

h

e

Scan

F

unct

ion

s

Chapter 1

!

Detail

For details on registering destinations and specifying settings, refer to the
sections listed below.
“Registering Abbreviated Destinations” on page 3-10
“Registering Group Destinations” on page 3-22

Setting the From Address

To perform Scan to E-Mail, the From address must be registered. The From
address is the address that indicates the sender when data is sent. Normally,
it is recommended that the e-mail address of administrator registration be
used.

If the e-mail address of administrator registration is not specified, the sender
e-mail address must be entered for each Scan to E-mail operation. Note that
Scan to E-Mail is not possible if the From address is not entered.

2

Note

When the user authentication setting is enabled, the e-mail address that
is specified for each user becomes the From address.

Specifying the Scan Settings

The following scan settings can be specifying when scanning a document.

These settings are specified from the touch panel of the machine.

Item

Description

File Type

Sets the file type to be saved.

Resolution

Sets the scan resolution.

Simplex/Duplex

Selects whether to scan one side of the document or both sides.

Original Type

Sets the type of image to be scanned.

Scan Size

Sets the size to be scanned.

Color

Sets the color of the scanned document.

Background Removal

Adjusts the density of the background (blank areas) of the document.

Original Setting

Specifies the type and characteristics of the loaded document.

Application

Provides functions for adjusting the print image, for example, for scan-
ning books and for erasing the surrounding area.

Advertising