5 flow chart of setup and scanning operations, Flow chart of setup and scanning operations -12 – Konica Minolta BIZHUB C252 User Manual

Page 31

Advertising
background image

1

Before Using the Scan Functions

1-12

C252

Be

fo

re

Using

t

h

e

Scan

F

unct

ion

s

Chapter 1

1.5

Flow Chart of Setup and Scanning Operations

The sequence from the setup operations required to use the scanning func-
tions to the scanning operation is shown below.

Specify scan settings in the screen that appears after pressing the [Utility/Counter] key,
then touching [User Setting].
* Specify basic settings such as the format in which scanned data is saved. (Refer to
“Setting the Main Scan Mode Screen” on page 3-31 and “Setting the Save Format of the
Data to Be Scanned” on page 3-35.
)

Specify network settings in the screen that appears after pressing the [Utility/Counter]
key, then touching [Administrator Setting].
* Specify settings in order to use the machine on the network. (Refer to “TCP/IP Settings”
on page 3-48
, “NetWare Settings” on page 3-55, “http Server Settings” on page 3-60,
“FTP Settings” on page 3-67, “SMB Settings” on page 3-70, “AppleTalk Settings” on
page 3-74
, “Enabling LDAP Settings” on page 3-76, “Setting Up LDAP Settings” on
page 3-78
, “Search Default Setting” on page 3-87, “E-Mail TX (SMTP) Settings” on
page 3-88
, “E-Mail RX (POP) Settings” on page 3-96, “Device Settings” on page 3-100,
“Time Adjustment Settings” on page 3-102, “Status Notification Settings” on
page 3-105,
“Total Counter Report Setting” on page 3-107, “PING Confirmation” on
page 3-112,
“SLP Settings” on page 3-116, “LPD Settings” on page 3-117, “Prefix/Suffix
Settings” on page 3-118,
“Job for the disable proof” on page 3-122, “SNMP Settings” on
page 3-124,
“Bonjour Setting” on page 3-130, “TCP Socket Setting” on page 3-132,
“OpenAPI Settings” on page 3-134, and “External Server Authentication” on
page 3-139.
)

Register destinations in the screen that appears after pressing the [Utility/Counter] key.
* Specify e-mail addresses for e-mail transmissions, register FTP servers, and
specify destination computers. (Refer to “Registering Abbreviated Destinations” on
page 3-10
, “Registering Group Destinations” on page 3-22, “Registering Program Desti-
nations” on page 3-24,
and “Specifying E-Mail Settings” on page 3-27.)

Load the document.

Specify the destination.

Specify the scan settings (refer to page 2-42).

Press the [Start] key in the control panel.

Advertising