Konica Minolta BIZHUB C450 - Manual (Page 143)

3 User Operations
3-32 C450
Use
r Op
er
at
ions
Chapter 3
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the screen shown in step 9.
13
Touch [OK].
? What precautions should be used when User Box Type is set to
Public?
% If the User Box Password entered does not meet the requirements
of Password Rules with [Public] set for User Box Type, a message
appears that tells that the User Box Password entered cannot be
used. Enter the correct User Box Password. For details of Pass-
word Rules, see “Password Rules” on page 1-11.
14
To prevent entry of a wrong password, enter the 8-digit User Box Pass-
word again.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the screen shown in step 9.
15
Touch [OK].
? What happens if there is a mismatch in the User Box Passwords?
% If there is a mismatch in the User Box Passwords, a message ap-
pears that tells that there is a mismatch in the User Box Passwords.
Perform steps 12 through 15 once again.
c450_security_E.book 32 ページ ２００７年４月１１日 水曜日 午前１０時３２分