Konica Minolta bizhub 360 - Manual (Page 67)

Using copy functions
2
bizhub 360 2-29
U
s
in
g cop
y
fu
nct
ion
s
Ch
ap
te
r 2
Touch [Auto] to automatically determine the
stapling or hole-punching position according to
the orientation of the loaded original. The paper
is stapled or holes are punched along the long
side of the paper if the original length is 11-11/16
in. or less or along the short side of the paper if
the original length is more than 11-11/16 in.
3
Touch [OK] in each screen.
The Basic Screen will be displayed.