Konica Minolta bizhub 360 - Manual (Page 7)

Introduction
bizhub 360 x-5
Contents
1 Before making copies
1.1 Control panel parts and their functions .1-2
1.2 Adjusting the angle of the control panel 1-6
To lower the angle of the control panell . 1-7
To raise the angle of the control panel ... 1-7
1.3 Screens in Enlarge Display mode ...........1-8
To display the screens in Enlarge Display
mode ....................................................... 1-8
1.4 Touch panel ............................................1-10
Touch panel operation .......................... 1-10
Icons that appear in the screen ............ 1-11
Paper type icons ................................... 1-12
Paper supply icons ............................... 1-14
1.5 Feeding the original ...............................1-15
To load the original into the ADF .......... 1-15
To place the original on the original glass 1-16
1.6 Specifying original settings ...................1-18
Copying originals of mixed sizes (“Mixed
Original” setting) ................................... 1-19
Selecting the original orientation (“Original
Direction” settings) ................................ 1-22
To select an Original Direction setting .. 1-23
Selecting the position of the binding margin
(“Margin” settings) ................................ 1-24
To select a Margin setting ..................... 1-25