Konica Minolta bizhub 360 - Manual (Page 113)

Using fax functions
4
bizhub 360 4-5
Us
ing fax
func
tions
Ch
apt
e
r 4
4.2 Specifying a recipient
!
Detail
Destinations can easily be specified if they have been
registered in Utility mode. For details on registering
destinations, refer to the User’s Guide [Facsimile
Operations] and User’s Guide [Network Fax Operations].
To send or receive faxes manually, touch [Off-Hook].
When this key is touched, the dial tone can be heard
from the speaker. For details, refer to the User’s Guide
[Facsimile Operations] and User’s Guide [Network Fax
Operations].
The following procedure describes how to specify the
recipient where the fax is to be sent.
To use a program
If a destination has been registered with a program, the
fax number can be dialed simply by touching the
Program key.
If a destination has not been registered with a program,
the destination cannot be specified.
If transmission settings have been registered with the
program, the functions are automatically set.
Only one program can be selected.