Konica Minolta bizhub 360 - Manual (Page 66)

2
Using copy functions
2-28 bizhub 360
U
s
in
g cop
y
fu
nct
ion
s
Ch
ap
te
r 2
To select Finishing settings
1
Touch [Finishing] on the Basic Screen.
The Finishing Screen will be displayed.
2
Select the desired settings.
– To cancel changes to the settings, touch
[Cancel].
– To cancel a setting, touch the key again to
deselect it.
– If the “Corner Staple”, “2 Staple”, “2-hole Punch”
or “3-hole Punch” setting was selected, touch
[Position Setting], and then touch the key for the
desired position.